Remove iron and manganese from groundwater, without chemical oxidants
Iron and Manganese above the guidelines? Resident complaints of rust/black colored stains and deposits?
You may have a manganese or iron treatment problem!
MagBio biofilters remove iron, manganese and, when present, ammonia from groundwater using air and bacteria natural biological process!
No chlorine, permanganate or other oxidant to buy, store or dose.
Magnor supports your project from water analysis and pilot testing to commissioning.
Expertise since 1965Built in CanadaNo chemical oxidant
Biofiltration Designed Around Your Raw Water
Stop iron and manganese before they cause problems
Meet guidelines, prevent discolored water, staining, pipe deposits and fouling of equipment, membranes and downstream treatment.
Reduce chemicals and backwash water
No oxidant to dose. Filtration rates are generally higher than with greensand or pyrolusite filters, so you backwash less often and can use smaller tanks.
Count on long-term support
Commissioning, operator training, maintenance and technical assistance from a Canadian team.
Send us Your Raw Water Analysis
Iron, manganese or ammonia in your water? Share your water analysis and flow rate. We’ll tell you whether biofiltration fits your water and which configuration to test.
Two Configurations, One Goal: Clean Groundwater
Magnor helps you choose the configuration that fits your water, space and your budget.
MagBio : series configuration. Two biofilters in sequence: the first removes iron, the second removes manganese. The traditional approach when each contaminant needs its own stage.
MagBio+ : dual-media configuration. A Magnor proprietary design. Two layers of different media remove iron and manganese in a single filter, saving floor space and reducing equipment costs.
IronManganeseAmmoniaGroundwaterWell WaterNo chemical Oxidant
From Pilot Test to a Working Biofiltration System
Bring us your raw-water analysis and flow rate. Our team checks whether biofiltration suits your water and, in most cases, runs a treatability test.
We then size the filters, media, air injection and backwash settings, build the system in our Boucherville plant, commission it, train your operators and stay available for maintenance.
Want the technical details? See how MagBio works.
Water Treatment Built in Canada Since 1965
Municipalities, engineering firms and industrial plants rely on Magnor for drinking and process water treatment.
From our plant and analytical lab in Boucherville, Quebec, our multidisciplinary team designs, builds and supports systems for sites across Canada, including remote locations.
Peace of mind, from water analysis to long-term support.
Frequently Asked Questions on Our Biological Filters
Air is injected into the raw water, then the water flows down through a bed of granular media. Biological activity that grows on the media oxidize iron and manganese, which stay in the filter until the next backwash.
No chemical oxidant is injected to remove iron and manganese. Oxygen comes from air injections. Any disinfection required by regulations is handled separately.
Yes. When ammonia is present in the raw water, it is removed in the same biological process.
It works without a chemical oxidant and generally runs at higher filtration rates with less frequent backwashing. That can mean smaller tanks and less backwash water.
MagBio uses two filters in series, one for iron and one for manganese. MagBio+ removes both in a single dual-media filter to save floor space and cost. It will depend on the level of iron, manganese and other contaminants, as well as the results of a treatability test. Our team will recommend the best approach after reviewing your water analysis
Results depend on dissolved oxygen, temperature, pH, contact time and the capacity of the filter to develop biological activityin a specific application. A treatability test confirms the configuration, sizing and backwash settings before you invest.
