Biological filtration of iron and manganese (MagBio)
Biological filtration of iron and manganese is a groundwater treatment process based on the combined action of bacteria naturally present in the water and oxygen to oxidize these metals, which are then retained in the filter.
MagBio's biofiltration technology proposed by Magnor aims to remove iron, manganese, and, when present, ammoniacal nitrogen from groundwater. The process combines oxygenation by air injection and biological filtration with downstream flow on granular media. No chemical oxidant injection is required.
The treatment relies on biological, physical, and physicochemical mechanisms that develop on the surface of the media. Performance depends in particular on dissolved oxygen, filtration rate, contact time, temperature, biological maturity, and washing efficiency.
Water flow rate and filtration rate
The filtration speed and contact time must be established according to the quality of the raw water and the project objectives. However, filtration speeds are generally higher than those of green sand filtration and manganese dioxide (pyrolusite) filtration, and allow for less frequent backwashes. This optimizes tank sizes and the water used for backwashes.
Types of biofilters for iron and manganese removal
Magnor offers two biofilter configurations, chosen according to the quality of the raw water, available space, and project objectives.
Serial configuration (MagBio)
The series configuration includes two independent biofilters installed sequentially. This traditional configuration first removes the iron from the first filter, then the manganese from the second filter.
Dual-layer configuration (MagBio+)
The two-layer configuration, a proprietary innovation at Magnor, includes 2 different media layers and aims to remove iron and manganese in a single filter. This allows for optimization of floor space and the costs related to this type of treatment.
How biological filtration of iron and manganese works
Raw water is first oxygenated, then distributed to the biofilter(s). As it passes through the media, contaminants are oxidized and retained. Solids gradually accumulate until a wash is triggered. Monitoring flow, pressures, differential pressure, dissolved oxygen, temperature, pH, and water quality must be considered during operation.
The advantages of biological filtration: a chemical-free treatment
MagBio biological filtration is intended to remove:
- iron;
- manganese;
- ammoniacal nitrogen, when present in raw water.
All this without using injections of chemicals such as sodium hypochlorite and potassium permanganate.
Maglor's promise : biofiltration tailored to your raw water
Magnor offers biofiltration as a treatment solution suited to raw water conditions and project-specific objectives. The selection of configuration, sizing, instrumentation, commissioning strategy, and washing parameters must be confirmed during project engineering and generally through treatability tests.